The Ingersoll Rand 750 air compressor is one of the best commercially available compressor systems available on the market. With a small sized compact Centac dynamic centrifugal compressor design, it’s a good choice for any application. Swift Equipment Solutions supplies high-quality air compressor units from this brand and provides service and maintenance as well as support for operation of these machines. Proper operation of the unit ensures proper function and safety while preventing damage to the unit itself.
Inspect Before Operating The Ingersoll Rand 750 Air Compressor
Before operating, be sure to inspect all couplings and connection to the compressor are locked down and secure. Failing to secure any part of the system may cause injury or damage to the compressor or other equipment. Also ensure that vital couplings are well lubricated with the proper type of grease. In this case, use the supplied Cenlub GL grease for the Ingersoll Rand 750 air compressor.
Check the main drivers for loose bolts and proper lubrication of bearings and other moving parts. Hand crank the shaft to ensure that it is moving freely, then dowel down the driver feet to maintain alignment of the shaft to the compressor. Make certain that the unit is level before operation. This will help in proper function of the IR 750 air compressor.
Take a closer look at the Ingersoll Rand 750 Air Compressor with this comprehensive overview, covering its major features and how it operates.
Ensuring A Safe Start
Before starting the driver, turn on the cooling for the oil, air, and heat exchangers. Check your seal pressures for the proper setting of 7-8 PSIG. The oil temperature should be at 95 degrees Fahrenheit. Check that the inlet and bypass valves are in the correct positions. Only then can you press the start button to ensure a safe start.
Always check that the pressure levels while in operation and adjust the settings are necessary. Also watch out for excess vibrations and overheating and temperature levels for the cooling water. To stop the compressor, simply push the “Compressor Stop” button. Refer to the driver manual for proper shutdown procedure for the drive unit.
Leave A Comment